Study of using a multi-touch tabletop technology to facilitate collaboration,interaction, and awareness in co-located environment

This study aimed to evaluate how differently co-located users perform and interact while solving problems by using existing and newly developed interaction mechanisms of a multi-touch tabletop system on a large-size tabletop display. Furthermore, this study aimed to investigate users’ perceived situation awareness due to the system. This study conducted one experiment and introduced three newly developed interaction mechanisms: two-way rubber band, drag-and-response, and centre collection area. Two-way rubber band enables users not only to send but also to request digital objects. Drag-and-response allows users to accept or to reject digital objects sent by others; therefore, it eliminates conflicting situations and interference. Centre collection area stores, organises, and manages shared digital resources on a surface of a tabletop display, so that users have an overall picture of available resources. This paper discusses results of an experiment, research findings, and implications along with conclusions and several suggestions for future development and research.     

Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Material encapsulation in poly(methyl methacrylate) shell: A review

Material encapsulation is a relatively new technique for coating a micro/nanosize particle or droplet with polymeric or inorganic shell. Encapsulation technology has many applications in various fields including drug delivery, cosmetic, agriculture, thermal energy storage, textile, and self-healing polymers. Poly(methyl methacrylate) (PMMA) is widely used as shell material in encapsulation due to its high chemical stability, biocompatibility, nontoxicity, and good mechanical properties. The main approach for micro/nanoencapsulation of materials using PMMA as shell comprises emulsion-based techniques such as emulsion polymerization and solvent evaporation from oil-in-water emulsion. In the present review, we first focus on the encapsulation techniques of liquid materials with PMMA shell by analyzing the effective processing parameters influencing the preparation of PMMA micro/nanocapsules. We then describe the morphology of PMMA capsules in emulsion systems according to thermodynamic relations. The techniques to investigation of mechanical properties of capsule shell and the release mechanisms of core material from PMMA capsules were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48039.     

气控环形防喷器密封胶芯大变形分析

针对气控环形防喷器胶芯在密封过程中的大变形以及与油管存在密封压力难以计算的问题,建立胶芯物理模型,结合厚壁筒理论与橡胶本构方程,同时考虑胶芯的材料非线性和几何非线性,探讨防喷器密封过程中胶芯变形与接触压力的变化。根据胶芯变形过程中无变形阶段、自由变形阶段和接触变形阶段的不同受力状况,利用迭代的方法对每个离散微段施加控制压力,得到不同控制压力下胶芯变形量与接触压力,并与仿真结果进行比较。结果表明:在自由变形阶段,随控制压力增加,胶芯变形量逐渐增大且由中间向两侧逐渐减小;在接触变形阶段,胶芯内径保持不变,且与油管间接触压力不断增加。采用胶芯变形理论方法计算的接触压力变化规律与仿真结果基本相同,验证了胶芯变形理论计算方法的正确性。     

Surface modification of nanocrystalline cellulose and its application in natural rubber composites

As a biopolymer with high mechanical strength, nanocellulose was generally considered as a green filler for reinforcing polymer. In this study, nanocrystalline cellulose (NCC) isolated from softwood pulp was successfully modified by cetyltrimethyl ammonium bromide (CTMAB), a cationic surfactant, and the modified nanocrystalline cellulose (m-NCC) was used to reinforce natural rubber (NR). In this composite architecture, it was found that when the filler content was 5 or 10 phr, the surface modification of NCC improved the dispersion state of NCC in NR matrix and the interfacial interaction between NR and NCC. Therefore, the NR/m-NCC composites exhibited outstanding mechanical properties, and its tensile strength, elongation at break and tear strength was increased by 132.8, 20, and 66.1%, respectively, compared to pristine NR composites. Besides, the modified NCC could accelerate the vulcanization and improve wet-skid resistance and aging resistance of NR composites. It is envisioned that the modified NCC has the potential to be generalized to manufacturing other polymer matrix composites strengthened with nanocellulose.     

基于压缩机-支架系统的异常噪声研究

针对某乘用车发动机转速在1 573 r/min，压缩机开启时车内噪声异常的问题，对样车进行试验分析与诊断，对压缩机-支架系统进行仿真分析，提出改进方案并验证改进效果。利用LMS声振信号采集系统采集振动噪声数据，采用频谱分析、阶次追踪等方法，并结合压缩机-支架系统模态仿真结果，确定车内异常噪声是压缩机轴频21阶与压缩机-支架系统3阶模态频率接近发生共振造成的。通过优化支架结构来提高压缩机-支架系统3阶模态频率以此来避免共振，并换装橡胶驱动盘缓和压缩机输入扭矩波动。将改进结构进行整车试验，结果表明：匀速工况空调开启时问题转速下，车内噪声降低了2.5 dB(A)；匀加速工况空调开启时发动机转速1 500~1 650 r/min区间，车内噪声无峰值，其余转速空调开启时改进前/后车内噪声基本不变，噪声波动趋势平缓。     

自愈合橡胶材料研究进展

具有自感知、自诊断、自愈合功能的智能聚合物材料是高分子科学领域的前沿材料之一。介绍了自愈合橡胶材料的自愈合机理,综述了自愈合橡胶材料的分类、特性和发展概况,展望了其应用及发展前景。     

Flame-retardant properties and synergistic effect of ammonium polyphosphate/aluminum hydroxide/mica/silicone rubber composites

The flammability behaviors of ammonium polyphosphate/aluminum hydroxide/mica/silicone rubber (APP/Al[OH]₃/mica/SiR) ceramifying composites containing APP, Al[OH]₃, and mica are investigated by cone calorimeter test. The thermal degradation and the synergistic effect of APP/Al(OH)₃/mica/SiR composites are investigated by thermal gravimetric analysis, X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. APP/Al(OH)₃/mica/SiR composites with 25 wt% of APP, 20 wt% of Al(OH)₃, 25 wt% of mica, and 30 wt% SiR presents a much lower total heat release, the value of peak heat release rate (PHRR), the maximum average heat release rate, the longest time to ignition, and time to the PHRR (t_PHRR), compared with the flame-retardant properties from composites with filler of APP and mica or APP and Al(OH)₃ alone. The results indicate that there is an excellent synergism in APP, Al(OH)₃, and mica, which endows APP/Al(OH)₃/mica/SiR composites with both good flame retardancy and fire prevention. The study on the synergism effect between fire prevention and flame retardancy of APP/Al(OH)₃/mica/SiR composites indicates that compounds containing P-O-Al are formed due to the reaction between APP and Al(OH)₃ during combustion in the early stage and a coherent, dense, and sealed structure is formed due to the reaction in mica, phosphates, and the thermal decomposition products of SiR during combustion in the later stage.     

聚酯类增塑剂的合成与应用研究进展

综述了国内外聚酯增塑剂的合成及应用的最新研究进展，重点介绍了超支化、生物基、石油基聚酯增塑剂的合成与制备方法以及不同类型聚酯增塑剂在聚氯乙烯(PVC)、淀粉、聚乳酸、聚氨酯弹性体与橡胶制品中的最新应用研究进展；并对聚酯增塑剂未来发展方向做了展望。     

Long-term sustained-released in situ gels of a water-insoluble drug amphotericin B for mycotic arthritis intra-articular administration: preparation,in vitro and in vivo evaluation

Amphotericin B (AMB) was often used in intra-articular injection administration for fungal arthritis, because it could often bring a satisfactory therapeutic efficacy and a minimum systemic toxic side effect. However, because of the multiple operations and the frequent injections, the compliance of the patients was bad. Therefore, to develop a long-term sustained-released preparation of AMB for mycotic arthritis intra-articular administration is of great significance. The purpose of present study was to develop a long-term sustained-released in situ gel of a water-insoluble drug AMB for mycotic arthritis intra-articular administration. Based on the evaluations of the in vitro properties of the formulations, the formulation containing 10% (w/w) ethanol, 15% (w/w) PG, 0.75% (w/w) HA, 5% (w/w) purified soybean oil, 0.03% (w/w) α-tocopherol, 15% (w/w) water and 55% (w/w) glyceryl monooleate was selected as a suitable intra-articular injectable in situ gel drug delivery system for water-insoluble drug AMB. Furthermore, the results of the in vivo study on rabbits showed that the selected formulation was a safe and effective long-term sustained-released intra-articular injectable AMB preparation. Therefore, the presented in situ AMB gel could reduce the frequency of the administration in the AMB treatment of fungal arthritis, and then would get a good patient compliance.